Diễn đàn rao vặt 24h miễn phí

Máy Laser ST(3D)-170200LD-ZJ đa năng cắt, đục vải

Thảo luận trong 'Máy Móc Công Nghiệp' bắt đầu bởi vinco, 25 Tháng ba 2016.

  1. vinco Member

    Máy Laser ST(3D)-170200LD-ZJ đa năng cắt, đục vải

    A versatile laser machine that can do both cutting and perforating for jerseys, polyester, microfiber, even stretch fabric.
    150W or 275W RF metal CO2 lasers.
    Working area: 1700mm×2000mm (66.9” * 78.7”)
    High-speed scanning galvanometer system.
    Mesh conveyor working table with auto feeder.

    [IMG]
    High Speed Galvo Laser Cutting and Perforating Machine for Jersey
    ST(3D)-170200LD-ZJ
    Machine Features
    • This is a versatile machine that can do both cutting and perforating.
    • 150W or 275W RF metal CO2 lasers, high-speed scanning galvanometer and full servo motion cutting system, high speed (cutting speed is 5 times of the X-Y axis Co2 laser machine).
    • With conveyor working table. Ultra high-speed automated continuous cutting for a variety of fabrics (with auto-feeding system). Dramatically higher cutting speeds than traditional cutting tool.
    • According to the fabric and processing requirement, laser output power and processing speed is adjustable, maximum energy savings.
    Laser Advantages – Laser is an excellent choice for sports footwear and jersey cutting and perforating.
    • Laser has the characteristics of non-contact and heat processing.
    • Laser cutting, high precision, high efficiency, good quality, and automatic edge sealing. Laser perforating, clean, fine, and very fast.
    Galvo Laser machine to perforate jersey fabrics.
    Data Results
    • Material width: 336.5mm (13.2″); Length: 140.7mm (5.5″)
    Perforating time just 4 seconds!
    • Material: jersey fabrics with size 70cm (27.6″) ×90cm (35.4″)
    Perforating time only 25 seconds!
    • Materials of laser processing also have no limit for the vast majority of sportswear fabrics. For elastic fabrics, in particular, laser cutting has more advantages than other cutting tool or manual cutting.
    ST(3D)-170200LD-ZJ GALVO Laser Machine

    - working area: 1700mm×2000mm (66.9” x 78.7”)
    - with Germany GALVO laser head
    - with offline control software
    - with constant temperature water chiller
    - with conveyor working table
    - Servo motor system
    - 220V / single phase 60Hz

    High Speed Galvo Laser Cutting and Perforating Machine ST(3D)-170200LD-ZJ

    Technical Parameter
    Laser type Co2 RF metal laser tube
    Laser power 150W / 275W
    Cutting area 1700mm×2000mm
    Working table Mesh conveyor working table
    No-load max speed 0-420000mm/min
    Positioning accuracy ±0.1mm
    Motion system Offline servo system, 5 inches LCD screen
    Cooling system Constant temperature water-chiller
    Power supply AC220V ± 5% 50/60Hz
    Format supported AI, BMP, PLT, DXF, DST, etc.
    Standard collocation Mini air compressor, 1 set of 1100W top exhaust fan, 2 sets of 1100W bottom exhaust fans
    Optional collocation Auto-feeding system
    *** Note: As products are constantly updated, please contact us for latest specifications. ***

    Applicable materials and industry

    Suitable for polyester, microfibre fabric (textile), cellucotton, polyester fibre, etc.
    Suitable for jerseys, sportswear, sports shoes, wiping cloth, non-dust cloth, paper diapers, etc.
    People are increasing emphasis on sports and health, while have increasingly high requirements for the sports jersey and shoes.The comfort and breathability of jersey is very concerned by sportswear manufacturer. Most manufacturers are seeking to change the fabric from the fabric material and structure, and spend a lot of time and effort to promote innovation of fabrics. However, there are many warm and comfortable fabrics with poor ventilation or wicking capabilities. Therefore, the brand manufacturers shift attention to the laser technology.Combining technical fabrics and laser technology to deep processing of fabrics, is another innovation of sportswear. Its comfort and permeability is also favored by sports stars.
    Công ty chúng tôi rất hân hạnh được hợp tác và phục vụ Quý khách hàng.
    Mọi thông tin chi tiết Quý khách vui lòng liên hệ:
    Công ty TNHH Đầu Tư Quốc Tế Việt Nam
    Đ/c: Số 18BT4-1 khu đô thị Trung Văn, Nam Từ Liêm, Hà Nội
    Tell: 04 3566 6727 - 04 4450 8666 _ Hotline: 0912 817 066 - 0901 754 566
    Website: maylaserhn.com - vinco.com.vn

Chia sẻ trang này

Partner: liên hệ

Phiên bản iwin mới nhất - cach tri mun dau den - cach tri mun trung ca - thẩm mỹ viện - danh bạ thẩm mỹ viện - triệt lông vĩnh viễn - cach tri mun boc - giam can hieu qua - cham soc da mat - tap chi cong nghe - hướng dẫn nấu các mon ngon moi ngay Việt Nam - - tai iwin - tai game ban ca - game avatar - game iwin - khóa hoc photoshop - phòng khám đa khoa chất lượng cao TPHCM - Công ty thi công nội thất chuyên nghiệp nhất hiện nay